home products Enterprise Network Unified Wire Adapters 10G S7410-BT-OCP - High Performance, Quad Port, Programmable 1/10GbE Base-T Smart NIC
S7410-BT-OCP - High Performance, Quad Port, Programmable 1/10GbE Base-T Smart NIC
Chelsio
S7410-BT-OCP

S7410-BT-OCP - High Performance, Quad Port, Programmable 1/10GbE Base-T Smart NIC

Manufacturer: Chelsio

Datasheet: S7410-BT-OCP

Delivers to:

Contact us for volume discounts.

Status:

Authorised Distributors
Authorized Distributor
Stock
Stock Availability
Bulk Discounts
Volume Discounts
Support
Technical Support
Warranty
Includes Warranty

Product Detail

Chelsio’s S7410-BT-OCP is a quad port 1/10GbE Base-T Smart NIC with a PCI Express 5.0 host bus interface, optimized for storage, cloud computing, HPC, embedded, virtualization, security, AI, and other datacenter networking applications.

The seventh generation S7 ASIC technology from Chelsio provides the highest performance and efficiency, with dramatically lower host-system CPU communications. Thanks to an on-board hardware, that offloads TCP/IP, Unified RDMA (RoCEv2 and iWARP), iSCSI, NVMe-oF, NVMe/TCP, NVGRE, VXLAN, and TLS/IPsec processing from its host system and frees up host CPU cycles for the user applications. As a result, the system has the benefits of higher bandwidth, lower latency, and reduced power consumption.

The S7410-BT-OCP’s architecture utilizes Chelsio’s seventh generation Smart NIC technology that is road-tested across several tier-1 OEMs over the years and has evolved to support all offloads using host memory. As a result, S7410-BT-OCP can now enable a full featured offload technology in a small memory-free package to address the server and cloud applications at an aggressive price point and with a high connection capacity.

S7410-BT-OCP runs the predecessor T4, T5, and T6 silicon software to enable leveraging the user’s existing software investment without any modification.

S7410-BT-OCP - High Performance, Quad Port, Programmable 1/10GbE Base-T Smart NIC
https://www.epsglobal.com/getmetafile/d7d425fb-31de-45de-a9bf-f502097d15ac/S7410-BT-OCP?maxsidesize=400
Chelsio’s S7410-BT-OCP is a quad port 1/10GbE Base-T Smart NIC with a PCI Express 5.0 host bus interface, optimized for storage, cloud computing, HPC, embedded, virtualization, security, AI, and other datacenter networking applications.
S7410-BT-OCP
New
S7410-BT-OCP
0.00
Chelsio
https://www.epsglobal.com/getmetafile/e33e588e-2055-4caf-9f6c-fb2fef7fe876

Features & Benefits

  • IEEE 802.3az Energy Efficient Ethernet
  • IEEE 802.3ap Backplane Ethernet
  • IEEE 802.3ae (10 GbE)
  • IEEE 802.3z (1GbE)
  • IEEE 802.1p Priority
  • IEEE 802.1Q VLAN Tagging
  • IEEE 802.1Qbg EVB/VEPA
  • IEEE 802.1BR Bridge Port Extension
  • IEEE 802.1Qau Congestion Notification
  • IEEE 802.1Qbb PFC
  • IEEE 802.1Qaz (ETS)
  • IEEE 802.3x Flow Control
  • IEEE 802.3ad Load-balancing and Failover
  • Ethernet II and 802.3 encapsulated frames
  • Multiple MAC addresses per interface
  • Jumbo Frames up to 9.6 Kbytes
  • ITU-T G.8262, Sync-E
  • IEEE 802.1AS Timing and Synchronization
  • IEEE 1588 PTP
  • TCP/UDP checksum offload for IPv4, IPv6
  • TSO, LSO, and GSO for IPv4 and IPv6
  • VLAN filtering, insertion, and extraction
  • Packet filtering and attack protection
  • Nanosecond granularity 64b timestamping
  • Ethernet Routing (packet header rewrite)
  • Packet Tracing and Packet Sniffing
  • Adaptive interrupt coalescing
  • Receive Side Scaling (RSS)
  • Full TCP stack including IPv4 and IPv6
  • Extensive RFC compliance, fully featured
  • VLAN support up to 4096 VLAN IDs
  • Load balancing and failover capabilities
  • UDP Sockets API
  • Low user-to-user latency
  • Multicast replication on ingress or egress
  • Patented Seamless Failover
  • Proxy Switching
  • High-capacity offload without the card memory
  • iSCSI initiator and target mode stack
  • NVMe-oF Offload (iWARP)
  • NVMe-oF Offload (RoCEv2)
  • NVMe/TCP Offload
  • iSER Offload
  • Data-at-rest encryption
  • AES 128/256 and SHA1/SHA2 offload
  • TLS and IPsec co-processor mode
  • TLS and IPsec inline mode
  • Inline IPsec and TLS for all offload traffic
  • Secure firmware update
  • Hardware Root of Trust support
  • Inband Telemetry
  • NVGRE, VXLAN and GENEVE support
  • PCI-SIG SR-IOV, 256 VF, 8 PF
  • 264 port virtual switch
  • EVB, VEPA, Flex10, and VNTag
  • 512 MAC addresses
  • NAT Offload
  • Integrated Traffic Management
  • Advanced QoS support
  • Hierarchical QoS
  • Native RoCEv2 support
  • Native iWARP support
  • All to All support
  • Boot facilities: iSCSI, PXE, UEFI
  • Secure Boot
  • Internet Attack Protection
  • PFC, DCB, and CEE
  • Time stamping support
  • Flow mirroring, sampling and statistics
  • GPUDirect

Technical Specifications

ModelS7410-BT-OCP
Ports4
Wire InterfaceNRZ or PAM4; 4x1/10G Base-T RJ45
Physical Interface10GBASE
ConnectorRJ45
Host InterfacePCI Express Gen5 x8; MSI-X, MSI, legacy pin interrupts
Embedded Processors4 x RISC processors at 1.2GHz; 1 x DFP processor at 400Gb
Management and Other InterfacesUART; NC-SI; SPI Flash; I2C, GPIO; PLDM, MCTP (SMBus or PCIe), RBT; SyncE
Typ Power17W (configuration dependent)
WC Power19W (configuration dependent)
ComplianceFully RoHS Compliant
Operating Temperature0°C to 55°C or 32°F to 131°F
Airflow200 lf/m
-->

Manufacturer

Chelsio

Chelsio

Chelsio is a recognized leader in high performance 1/10/25/40/50/100Gb Ethernet adapters and ASICs for networking and storage within virtualized enterprise datacenters, public and private hyperscale clouds, and cluster computing environments.

Learn about Chelsio

Need Help?

We have local language and currency support in each of our 28 locations, ensuring you always have access to friendly customer support to deliver your hardware solutions regardless of your location.