Product Detail
The MPQ8636 is a fully-integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter. It offers a very compact solution to achieve 4A/10A/20A output current over a wide input supply range, with excellent load and line regulation. The MPQ8636 operates at high efficiency over a wide output-current?oad range. The MPQ8636 uses Constant-On-Time (COT) control to provide a fast transient response and ease loop stabilization. An external resistor programs the operating frequency from 200kHz to 1MHz, and the frequency keeps nearly constant as input supply varies with the feed-forward compensation. The default under-voltage lockout threshold is internally set at 4.1V, but a resistor network on the enable pin can increase this threshold. The soft-start pin controls the output-voltage startup ramp. An open-drain power-good signal indicates that the output is within nominal voltage range. It has fully-integrated protection features that include over-current protection, over-voltage protection and thermal shutdown. The MPQ8636 requires a minimal number of readily-available standard external components and is available in a 16-Pin QFN 3mm?mm or a 29-Pin QFN 5mm?mm package.
MPQ8636-4 4A, 4.5-18V,CCM, Non Latch-Off OVP/OCP, COT Synchronous Step-down Converter
https://www.epsglobal.com/Media-Library/EPSGlobal/Products/files/mps/MPQ8636-4.jpg?ext=.jpg&maxsidesize=400
The MPQ8636 is a fully-integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter.
MPQ8636-4
New
MPQ8636-4
0.00
Monolithic Power Systems (MPS)
https://www.epsglobal.com/manufacturers/mps
https://www.epsglobal.com/getmetafile/5919b031-ff1d-4f79-8c75-d15d466e323a