home products Optical Transceivers QSFP Transceivers FTCD3323R1PCL - 400G ZR+ QSFP-DD-DCO High Tx Output Power
FTCD3323R1PCL - 400G ZR+ QSFP-DD-DCO High Tx Output Power
II-VI | Finisar
FTCD3323R1PCL

FTCD3323R1PCL - 400G ZR+ QSFP-DD-DCO High Tx Output Power

PRICE: $0.00. Contact us to place order.

Manufacturer: II-VI | Finisar

Datasheet: FTCD3323R1PCL

Delivers to:

Delivers to Europe.

Contact us for volume discounts.


Authorized Distributor

Stock Availability

Volume Discounts

Technical Support

Includes Warranty

Product Detail

II-VI’s high transmit output power 400G QSFP-DD-DCO coherent transceiver will enable true IP-over-DWDM deployments in metro and regional optical transport networks. Reconfigurable optical add/drop multiplexers (ROADMs) in existing and emerging DWDM transport networks require a high optical launch power (0 dBm) and high transmit in-band and out-of-band optical signal-to-noise ratio (OSNR) on their add ports. The emerging OIF 400ZR and OpenZR+ MSA coherent transceivers in QSFP-DD and OSFP form factors generally have low transmit output power (-10 dBm), making them incompatible with ROADM networks. Consequently, to bridge the gap between the switch or router and the ROADM, networks still require transponder or muxponder equipment that uses coherent line interfaces either based on the larger CFP2 pluggable form factor, or on discrete component implementations on line cards. By plugging II-VI’s high transmit output power 400G QSFP-DD-DCO transceivers directly into their switches or routers, network operators can remove the intermediate transponder/muxponder equipment layer. This immediately reduces capital expenditures for network operators. But even more important, there are tremendous savings in operational expenditures: the IP-over-DWDM architecture enabled by the II-VI QSFP-DD-DCO shrinks the amount of space that needs to be rented in central offices or co-location sites, cuts down overall electrical power consumption, lowers cooling requirements, and simply reduces the number of network elements that need to be planned, installed, managed, and maintained.

FTCD3323R1PCL - 400G ZR+ QSFP-DD-DCO High Tx Output Power
https://www.epsglobal.com/getmetafile/743100f6-b336-4c42-a72a-a892c703663f/FTCD3323R1PCL?maxsidesize=400

II-VI’s high transmit output power 400G QSFP-DD-DCO coherent transceiver will enable true IP-over-DWDM deployments in metro and regional optical transport networks. Reconfigurable optical add/drop multiplexers (ROADMs) in existing and emerging DWDM transport networks require a high optical launch power (0 dBm) and high transmit in-band and out-of-band optical signal-to-noise ratio (OSNR) on their add ports. The emerging OIF 400ZR and OpenZR+ MSA coherent transceivers in QSFP-DD and OSFP form factors generally have low transmit output power (-10 dBm), making them incompatible with ROADM networks. Consequently, to bridge the gap between the switch or router and the ROADM, networks still require transponder or muxponder equipment that uses coherent line interfaces either based on the larger CFP2 pluggable form factor, or on discrete component implementations on line cards. By plugging II-VI’s high transmit output power 400G QSFP-DD-DCO transceivers directly into their switches or routers, network operators can remove the intermediate transponder/muxponder equipment layer. This immediately reduces capital expenditures for network operators. But even more important, there are tremendous savings in operational expenditures: the IP-over-DWDM architecture enabled by the II-VI QSFP-DD-DCO shrinks the amount of space that needs to be rented in central offices or co-location sites, cuts down overall electrical power consumption, lowers cooling requirements, and simply reduces the number of network elements that need to be planned, installed, managed, and maintained.

FTCD3323R1PCL
New
FTCD3323R1PCL
II-VI | Finisar
https://www.epsglobal.com/getmetafile/38c38d6f-96fa-4ba8-9fe1-f446f11e2e1a

Pricing Table

Technical Specification

Form Factor:
QSFP-DD
Data Rate (max):
400 Gb/s
Wavelength (nm):
C-Band DWDM Tunable
Connector:
LC
Max Distance:
> 600 km
Transmitter:
Tunable DP-16QAM/8QAM/QPSK
Receiver:
Coherent
Temperature Range (°C):
0 to 70
Voltage Supply (V):
3.3
Diagnostics:
Digital
Data Rate:
400G

Manufacturer

II-VI | Finisar

Finisar is now II-VI. Finisar is a global technology leader in optical communications. Their world-class products enable high-speed voice, video and data communications for networking, storage, wireless, and cable TV applications. For 30 years, Finisar have created critical breakthroughs in optics technology and supplied system manufacturers with the production volumes needed to meet the exploding demand for network bandwidth.

Learn about II-VI | Finisar

Need Help?

We have local language and currency support in each of our 28 locations, ensuring you always have access to friendly customer support to deliver your hardware solutions regardless of your location.

Request a callback from our experts