Mobile & Optical Edge

The C1216RO is a high-performance outside plant Ethernet switch that has been optimized for eCPRI fronthaul transport and CPRI-to-eCPRI conversion. The C1216RO supports the high bandwidth, low latency, and synchronization requirements of 5G fronthaul and midhaul networks in a unique outside plant IP65 configuration.The C1216RO provides 9x10GbE (SFP+)/25GE (SFP28) access Ethernet ports, and 2x25/50G (SFP28/DSFP28), and 2x100G (QSFP28) access or line Ethernet ports. Additionally, the C1216RO has 3x10GbE CPRI ports with an internal gateway function to convert CPRI into packetized eCPRI for termination at a packet-based DU.

E3226PC delivers 24 Gigabit Ethernet electrical ports (RJ45 10M/100M/1G) with PoE+ support (802.3 at/af with a total budget of 740W) on the subscriber side, and 2 combo (RJ45/SFP) Gigabit Ethernet ports on the network side. The E3226PC provides high switching capacity and performance for a wide range of applications supporting a mix of enterprise, industrial and carrier grade features.

The TMS-1190 chassis provides a mounting solution for the DA Series™ Deploy Anywhere Network Application Modules (NAMs). It offers carrier-grade features such as front-to-back airflow, redundant DC power, redundant field replaceable fan units, BITS, TOD, 1PPS, 10MHz timing, and optional GPS. The TMS-1190 also features a hot swappable management module supporting open-standard network management capabilities in a compact 1RU. It has four universal slots that can hold single-slot, double-slot and four-slot NAMs addressing a diverse variety of network application scenarios.

The M3500 is a 1RU (rack unit) Carrier Ethernet/IP aggregation switch that supports latency-sensitive, mobile packet-based transport. The unit is comprised of 48x1GE(SFP), 10GE(SFP+) or 25GE(SFP28) ports, and 6x40GE(QSFP+) or 100GE(QSFP28) ports for pluggable optics.The M3500 is designed to address mobile transport network challenges head on. With very high switching capacity, low latency, key synchronization features, and high service scalability, it gives service providers the agility and capacity they need to get mobile services to market quickly. Its advanced features are designed for next generation packet mobile deployments with traffic management and carrier class reliability in mind.

The M4000 is a high-performance, flexible, packet-based mobile transport router. Optimized for AnyHaul (Fronthaul, Midhaul, Backhaul) applications, the M4000 supports the tight latency, synchronization, and QoS requirements needed for 5G networks.The M4000 provides 32x10GbE (SFP+)/25GE (SFP28) ports for the subscriber side, and 2x40GbE (QSFP+)/100GbE (QSFP28) ports on the network side.

With three option slots, DZS's EXK-M2400 Mobile Backhaul access/aggregation CSR (Cell Site Router) 1U height chassis provides a variety of solutions to configure the unit according to the network environment. The EXK-M2400 provides four 10-gigabit ethernet ports (SFP+, fixed) and 3 option slots; the option slots support 2x10GBase-R(SFP+), 8x100/1000Base-T (RJ45), 8x100/1000Base-X(SFP) or CWDM Filter(LC) modules, which can be used for uplinks or downlinks.

The SABER-4400 is a compact, hardened, modular platform targeting the Access Edge/Metro Edge of the network. It has four universal slots that can hold one-slot, two-slot, three-slot and four-slot (full width) sleds to address a diverse set of network edge application scenarios from Layer 0 to Layer 3. Configurable sleds include Coherent Optical Transponders (TMX), Coherent Muxponders (TMX), Regens (TMX), Amplifiers (OFA), Path Protection Modules (PPM), CDC-Flex ROADMs (RDM), Flexible Optical cross-connects (FOX) and L2/L3 switching/routing (PKT).

Next generation mobile services will significantly raise the bar on performance requirements for AnyHaul by service providers and network operators. Rigid quality-of-service requirements in particular will make support for ultra-low latency, extraordinary capacity, and strong security paramount. Furthermore, service providers and operators will need to implement these new features in record time and extremely cost-effectively in order to compete in the market.

New mobile cell site switch/gateway solution is M 1500 for 4 G/ 5 G service, DASAN Zhone Solution(DZS) M 1500 is a 1 U height 10 inches width chassis outdoor installed switch M 1500 is optimized mobile small cell coverage as expanding the legacy networks architecture With central office solution(like V 8204 5 G distribution RAN architecture target in 5 G midhaul solution, easy extended from XGS PON ONU as cascading architecture, even clock hierarchy can afford to delivery as mobile device through 10 GE interfaces in M1500

The MPX-9103 provides efficient multi-protocol muxponding of 10G services onto a 100G OTU4 uplink. It uses advanced thermal design, making it the first 100G product of its kind to deliver extended life and high reliability in extended temperature range applications. With support for a 100G SR10, 100G LR4, and coherent DCO CFP uplink with different FEC modes, it offers much flexibility in reach, spectral efficiency and interoperability. Any combination of 10G client protocols can be muxponded onto a 100G uplink, with full performance monitoring and service demarcation for the uplink and client-side optics. Unlike Layer 2 aggregation platforms, the MPX-9103 uses Layer 1 ODU multiplexing, providing 100% deterministic full bandwidth and low latency for each client connection.